Is your home wireless router not working properly or seems to be working on its own? Then listen up, especially if you live in a condensed area like an apartment building.
Many people bring home wireless routers, plug in their Internet and away they go! Great, it works without doing anything! Well, heres whats going on and what you should do about it.
Out of the box all routers are set to whats called as default configuration, NO security enabled and broadcast frequency on channel 6 (2.437), so what does all this mean? Well, with no security anyone within proximity can log on, surf your Internet and possibly peruse your files. Most people are aware of this now and take action, all you have to do is run the disk that came with the router and apply the settings via the software wizard, its easy so I wont get into that.
What I want to really discuss is the channel frequency, probably one of the most overlooked issues on home and office routers today. If you have two or more routers within logon proximity (next door) and they are on the same frequency then they will fight for the air waves causing the loser to disconnect. Like I said, most routers out of the box (all that Ive seen) are set to channel 6 out of 12 channels, so my advice is change the channel! Another indication of an air wave fight is the router gets hot by working too hard.
Therefore to be able to resolve this kind of, all you need to carry out is get on the actual hub making the modification, all routers tend to be utilized through whats called a good Internet protocol tackle, youll find the actual address very easily simply by Looking for the help to make and asking for the actual Ip. For example Linksys IP address, here are the ones that I know: Linksys 192.168.1.1, Dlink 192.168.0.1, Netgear 192.168.0.1, SMC 192.168.2.1 its almost always one of these three (two are the same).
Now take the IP address and type it into the address bar in your web browser, this will access the routers interface, it looks like a web page, if it asks for a password its usually ADMIN or no password (use Google! linksys password). Just about all hub connects will vary which means you will have to find the funnel setting, itll be inside the wifi options menus and you will be drop down list of channels, I would recommend picking channel 1 or perhaps 11, and dont forget to apply changes or perhaps save changes soon after.
No related posts.
